Friday, January 4, 2013

20" iMac G4 NUC/AiO Ivy Bridge Mod: SUCCESS!

20" iMac G4 / NUC Ivy Bridge Mod

Updates:

I'm happy to report that all problems have been solved and the motherboard fit test was successful.  This is currently the method I would recommend for those that want a 20" Ivy Bridge Hackintosh version of this mod.  As I noted in my previous post, while I initially believed I would not go in the direction of the NUC board, its remarkably small size and simplicity made it by far the best candidate for this mod.

Original vs NUC/DVD - Front
In multiple previous posts I have explained the advantages of having the core elements (processor/motherboard) of the mod at the top of the dome where ventilation is best.  In my previous ECX mod, the board only fit with the optical drive because I did not use the native PSU.  Because I wanted to use the native PSU, I did not believe fitting the optical drive was possible, but with this board it looks like it is going to fit. (Although nothing is definite until this is completed).  This board fits into the slot left vacant by the 3.5" HDD (the mSATA is on the mobo itself).  It pretty much fits into the grooves in the drive chassis requiring no alternation.  For comparison, I have taken side by side photos of the original optical drive and HDD in the drive chassis next to the shorter new dvd optical drive and the NUC occupying that area.  The height is pretty much the same and there is amble room for the connectors to fit as well.


Original vs NUC/DVD - Top

Problem Solving:

With this fitting at the top of the dome, I should have even a little but more room for components than I did with my previous mod.  This is because, there are less port extenders needed and no SSD is required at the bottom of the dome.  It will still be tight, but I have some wiggle room to address the problems that I brought up in my previous post.  Taking them one at a time:

1) USB Ports: A 4 port USB Hub leaves me with only 1 spare USB port, but solves the problem.  The addition of another hub or a larger one is likely.  A USB port supplies the 5V to the PSU.

2) The Fan: The directional fan is connected to the heatsink and I did not want to remove it.  I also wanted to keep the case fan.  Apple's connectors and colors are completely backwards from industry standards (Black is 12V, Red is Ground and the fan out is a 3pin Male connector, not Female).  The fan is also somewhat loud and old, so I decided to replace it.  I bought a Antec 92mm fan that had a molex out (there is no case fan output on the board).  There is a sense pin that I won't be using.  Because I won't have software fan control, I got a model with a 3 speed setting.  I put it on medium to reduce noise and may extend the controller to the back ports or simply leave it on this setting.

Wide Input Pico PSU
While 12V are readily obtainable from the PSU, the problem is that the PSU is always on.  So, the fan will spin as soon as the computer is plugged in, no matter if the computer is on or not.  As the computer does not have any 12V out, I will have to use some kind of switch.  Luckily, the PSU comes natively with a "switch".  The PSU relies on the motherboard to downconvert 12V to 5V then feed 5V back to the PSU to turn on the 24V line that powers the monitor's backlight.  Although there are many other ways to do this, I went with an elegant solution using what I had available.  Keep in mind this is not the only peripheral that needs power.  The optical drive requires 12V and 5V in either a molex or SATA power connector.  Luckily, I had a very small 20 pin PICO power supply with a WIDE INPUT range up to 24V. (Not all PICO PSUs can accept 24V, may sure before you connect).  I spliced the PWR input to the Green wire of the PSU (24V) which connects to the Inverter Wires as well.  I connected the ground to a native PSU ground.  As this is a standard 20 pin ATX based PSU, it won't work without a motherboard unless you ground the On Pin.  I have it connected to a switch, but will likely just leave in a wire, allowing the PSU to turn on as soon as it receives 24V DC input from the native PSU.  This produces the necessary 12V and even a 5V and has both a Molex and SATA power cable out.  I connected the Molex to the Fan (you only need the 12V line and ground), and the SATA to the optical drive.  Now we the peripherals will only turn on when the motherboard itself is turned on.
PICO PSU powering the optical drive
The Bypassed Power Switch
3) Power Switch: I did not want to damage the board, so I simply threaded small wires between the onboard switch and its solder points.  I did this to the front right and back left corners.  This was then wired to the case switch at the bottom of the dome.  These can be easily removed in the future if this board is ever repurposed.  In addition this does not effect the functionality of the original switch in any way.

The case switch I use is from my previous mod. Modeling clay was used to secure a momentary switch directly behind the peg that protrudes from the back of the plastic power button on the back of the iMac dome.

4) Audio: I am sticking with the Turtle Bay USB Audio solution from my last mod.  This allows for a standard 3.5mm audio jack out and also supports a 3.5mm Microphone in.  I have it wired to the microphone in the LCD housing.

5) Bluetooth: I have not found anyone who has had success with any half height mini PCI-E that supports Wifi and Bluetooth with Mac OSX.  So, I am simply going to keep my very small USB bluetooth solution.

6) Optical Drive: I am using a DVD Burner that gets power via the PICO PSU discussed in #2.  The connection to the mobo is via a SATA to USB 2.0 adapter cable.

12V to 19V DC-DC Upconverter
7) Power: While the option of splicing the AC to the to the existing AC plug with the NUC's powerbrick is not a bad one, it is somewhat of a waste of the 180 watt PSU that already exists in the machine.  Not to mention that I'm already including a second PSU (which is really being used only as a downconverter here).  The NUC requires 19V at (at least) 3.7A and the PSU is only supplying 12V (can't use the 24V because its only on with 5V from the motherboard).  Luckily, 19V is the typical notebook operating voltage and therefore upconverters are available.  Though there is a much smaller selection than for more common voltages (24V, 12V, 5V etc).  Many different shapes an sizes are available.  I got one in a familiar shape on ebay from a Chinese manufacturer for $20.  Its relatively small ( I may remove part of the heat sink surrounding it) and is a 12V DC to 19V DC upconverter at 4A.  This is exactly what is required and works flawlessly.

The Upconverter connected to PSU and NUC
The Upconverter gets 12V and Ground in from the Native PSU and sends 19V out.  I had a broken Laptop AC power adapter that had a DC input that perfectly matched the power in plug on the NUC.  The positive is the inside peg and the negative is the outer part.  Using a multimeter I ensured which wire was which and connected this to the power supply via the up converter.

The Fit Test:

The Secured NUC Motherboard
On a side note, I used a rubber sleeve to cover the drive cage where the NUC will go.  After some guess and check, I determined the place where the  NUC and USB connectors seemed to fit the best. To test fit, I used twist ties that went through the screw holes in the grooves intended for the HD and then through the motherboard screw holes.  These will be replaced with plastic locking ties to secure the motherboard in place.
One thing to make sure of is that the wifi antennae which goes through the metal faraday cage (Wifi signal will be severely reduced if the antenna is within the cage) is connected to the wifi card before the board is secured.


Build Pics:

A Mess of Wires, But A Working Mod
Video and Audio Test
Motherboard View
About This Mac Screen

Remaining Issues:

Obviously, there is a lot of cable management to do.  This will get much simpler once connections are directly soldered (connectors removed and alligator wires eliminated).  As I technically have more room at the bottom of the dome than the previous mod (also had a DC converter and a PICO PSU to deal with), I do not believe this will be difficult to fit.  The wire management, however, may be more involved.

There will a paucity of ports.  A 3.5mm audio out, a few USBs, and not much else.  If I had to do it over, I probably would not have bothered spending the extra money on the Thunderbolt equipped version.  There are so few available peripherals and there are so overpriced that I can not even test this. Perhaps this is somewhat future proofing, but I would imagine there will be further upgrades to this board before thunderbolt actually takes off (if it ever does).  That said, I would not have bothered with an ethernet extender anyway.  I've learned with this that the more you do, the more that can go wrong.  I am more than happy to keep it simple.  I also have the option of adding a powered USB hub with the 12V lines in the PSU.  Unlike my previous mod which was very close to its power maximum, this should have room to spare.

Concluding Thoughts:

Untili I have it assembled and have worked with it for a while, I'm cautious about speaking too soon, but I am very optimistic about this project.  Although to Core i5 Sandy Bridge to a Core i3 Ivy Bridge may seem like a lateral move, this board is simply a better fit.  Its lower power, quieter, and everything onboard works.  The incorporation of the native PSU while keeping the optical drive makes this virtually indistinguishable from the original 20" iMac G4.

Hopefully will finish soon! Thanks for reading.

65 comments:

  1. Hi Jon,

    Congrats on another great mod.

    A few questions if I may:

    Does the hackintosh behave any different to a mac mini? (my previous Hackintosh would not wake for network access properly)

    Could the HDMI conversion be achieved by soldering an HDMI lead direct to the video wires coming from the neck.

    Does the display sleep with the NUC?

    Many thanks,

    Roger

    ReplyDelete
  2. Hi Jon,

    I'm using the same MOBO for a simpler project, a G4 Cube Mod.I would like to ask you some questions:

    I use pins 6 & 8 from the Front Panel Header to bypass the onboard power switch. Is there any advantage in the bypass method you're using?

    Do you have any plans for the thunderbolt port?

    Is the Front Panel USB 2.0 Header somehow usable? (There are no pins!)

    Many thanks
    Fermin

    ReplyDelete
  3. Nice work! Can I get you to do a similar job for me? How much?

    ReplyDelete
    Replies
    1. Sorry, not interested in making/selling these. But, advise is free.

      Delete
  4. Hi JBerg, I purchased a pristine 17" model. Is it possible to run the NUC board with the 19v DC input split into two, ie) one DC plug to the motherboard and one DC to the PicoPSU? From what I'm reading, I don't need the 24v line for the backlight on the 17" model. I'd like to run without the native PSU, with a 12-25 wide input picopsu only to supply the case fan and inverter.

    Your comments or how to would be great. Thanks for your tremendous resource here.


    Cheers!

    ReplyDelete
  5. You have made 20" iMac G4 with your own idea and hopefully you are succeeded in this project. I noticed so many people who have creative ideas about electronics and happy to do some modification. I am also preparing a project by converting monitor into television. I have a tip for students to get college essay writing service from our trusted source which has proven record of people' satisfaction.

    ReplyDelete
  6. hello i want to return to factory configuration can you tell me colours of pinout in orginal g4 inverter socket?

    ReplyDelete
  7. thanks for all the information here it is the best thing ever
    Friv 45
    Kizi 1

    ReplyDelete
  8. This is also a very good post which I really enjoyed reading. It is not everyday that I have the possibility to see something like this.

    funny happy thanksgiving

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
  10. Hey I'd like to convert a 20" imac to simply use as a HDMI monitor for a raspberry Pi. The sleep function isn't a necessity as I'll always have it on.

    Unfortunately, my on board PSU is dead.

    What PSU would you recommend that I use? A 24v or the one you had on the 17" conversion?

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. cara menggugurkan kandungan kandungan dengan cepat dan akurat terbukti ampuh untuk melunturkan janin kehamilan muda 1 minggu hingga 1 , 2 , 3 dan 4 bulan
    obat penggugur kandungan adalah suatu bentuk proses berakhirnya kehamilan dengan dikeluarkannya janin ( fetus ) atau embrio sebelum memiliki kemampuan untuk berkembang dan bertahan hidup diluar rahim , sehingga bisa menyebabkan kematiannya pada janin
    Disini akan kami beritahukan kepada Anda langkah cara cepat menggugurkan kandungan dengan cepat dan selamat adalah KURET dan obat aborsi
    Kunyit memang tidak di baik di konsumsi oleh ibu hamil yang sedang hamil muda sehubungan dengan sifatnya untuk melancarkan haid , dan di percayai sebagai obat telat datang bulan
    jual obat aborsi paling manjur Misiprostol Cytotec asli terbukti ampuh melunturkan janin kuat tanpa kuret dengan bersih untuk usia 1 , 2 , 3 sampai 4 bulan dengan aman

    ReplyDelete
  13. I really happy to find this site, i am so happy read this topic. Jiofi default password

    ReplyDelete
  14. لو بتدور على طوبه شركة محترمه تتعامل معاها فى شراء مواد البناء فى السوق المصرى او حتى تصدير لوروبا والخليج العربي وليبيا مش هتلاقى افضل من مصانع طوب طفلى
    الفرج عندنا وبس هتلاقى افضل الخامات وبافضل سعر فى السوق
    منتجات شركتنا :
    اسعار الطوب الاحمر


    سعر البردورة

    اسعار الانترلوك

    اسعار الطوب الاسمنتى
    افضل مصنع تقدر تتعامل معاه من حيث الجوده والاسعار فى مصر اليكم دليل مصانعنا
    مصنع طوب طفلى

    اسعار الطوب الاسمنتى المصمت

    مصانع الطوب الاسمنتى

    سعر متر البردورة فى مصر

    مصنع انترلوك

    سعر متر بلاط انترلوك فى مصر

    ReplyDelete
  15. thanks for sharring such as information, i really helped.

    how to change jiofi password

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
  17. Thanks for sharing this Valuable information. I like this blog.
    Learn Digital Academy has been Bangalor's leading training institution in Digital Marketing.
    courses in digital marketing in bangalore

    ReplyDelete
  18. This blog is very creative and very interesting. After a long time, I see the great blog with a good explanation about this topic and this post is very useful for me. I like to you more unique post, please update them...
    Oracle Training in Chennai
    Oracle Certification in Chennai
    Tableau Training in Chennai
    Oracle DBA Training in Chennai
    Linux Training in Chennai
    Excel Training in Chennai
    Unix Training in Chennai
    Power BI Training in Chennai
    Oracle Training in Tambaram
    Oracle Training in Thiruvanmiyur

    ReplyDelete
  19. Great post! I am actually getting ready to across this information, It’s very helpful for this blog.Also great with all of the valuable information you have Keep up the good work you are doing well.
    Devops certification training
    Devops online training
    Devops online course

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. I'd like to thank you for the efforts you have put in writing this website. I am hoping to check out the same high-grade blog posts from you later on as well.develop In truth, your creative writing abilities has motivated me to get my very own blog now ;)

    ReplyDelete
  22. Really impressive article. I have ever read. Thanks for sharing keep writing these type of articles and help people to get more knowledge
    AWS training in Chennai

    AWS Online Training in Chennai

    AWS training in Bangalore

    AWS training in Hyderabad

    AWS training in Coimbatore

    AWS training

    ReplyDelete
  23. This comment has been removed by the author.

    ReplyDelete
  24. Really very informative article. Thanks for posting this article.
    home for sale in Austin

    ReplyDelete
  25. Hi,
    Thanks for sharing.
    I love looking through an article that will make people think.
    Denver homes for sale

    ReplyDelete
  26. Hi,
    Thanks for sharing this article. It's very helpful for us.
    sports massage in Atlanta

    ReplyDelete
  27. Thanks for sharing this article. It's very helpful for us.
    B2B Massage in Arizona

    ReplyDelete
  28. I loved the article, keep updating interesting articles. I will be a regular reader, Thanks for sharing this. Erotic Massage in Tucson

    ReplyDelete
  29. You are really doing a marvelous job and keep the good work up and you have really inspired me.
    We are telecasting Hindi Reality Tv Show Bigg boss 15 free.Visit us to watch online its all episodes.
    Zindagi mere ghar aana watch online
    Watch zindagi mere ghar aana live
    Zindagi mere ghar aana full episode

    ReplyDelete
  30. 360DigiTMG, the top-rated organisation among the most prestigious industries around the world, is an educational destination for those looking to pursue their dreams around the globe. The company is changing careers of many people through constant improvement, 360DigiTMG provides an outstanding learning experience and distinguishes itself from the pack. 360DigiTMG is a prominent global presence by offering world-class training. Its main office is in India and subsidiaries across Malaysia, USA, East Asia, Australia, Uk, Netherlands, and the Middle East.

    ReplyDelete
  31. salesforce institute in hyderabad with placements claimed to be the best salesforce training institute millions of opportunities are waiting for you in salesforce. salesforce has become an inevitable factor. new technologies and trends expanded the scope of salesforce to another level

    ReplyDelete
  32. Much obliged correspondingly a ton for this proposal. I really want to permit you remember I agree in regards to a few of the elements you are making here and others might require some computation outline, however i'm ready to see your viewpoint. Free Download KMSpico

    ReplyDelete
  33. incredibly great article! I pulsate individuals to acknowledge exactly how amicable this compensation for an assessment is for your article. Its tempting, convincing substance material. Your points of view are greatly gone my own getting into excuse to for this topic. Coffeecup Web Form Builder

    ReplyDelete

  34. Intriguing test for a weblog. I've been filtering the net for diversion just and showed up re your web site page. impeccable lucid. Thankful to you a ton for sharing your knowledge! it is fortifying to look that specific people anyway supplement an undertaking into adjusting to their locales. I'll be genuine to check affirm inside the works over again unambiguous quickly. Earth Day Wishes 2022

    ReplyDelete
  35. Black Hole mode APK typically refers to a modified or unofficial version of an application designed to enhance or alter its features in ways not supported by the original developers.
    https://blackholapk.com/

    ReplyDelete